The SOURCE PODRACER project is a collaborative FPV frame project initiated by Team BlackSheep. The frame is donated to the community to empower creators and makers, and integrate best practices and current trends faster into a continuously manufactured product. In return, it allows the local distribution network to have cheap and direct access to a good frame in order to allow them compete in an increasingly predatory marketplace.
The hope is for this frame to enable broad access to FPV thanks to a low price point, great documentation and wide availability of compatible parts and accessories, without violating other people’s intellectual property.
1 x Carbon Frame Set
1 x Nylon SLS Printed Pod
1 x Screw Set
Stacking Mounting Plate: 1.5mm
Bottom Plate: 1.5mm
Arms: 5mm thick
Stack Mout: 19 x19mm, 26x26mm, 20x20mm
Motor Mount: 12 x 12mm & 9 x 9mm
Frame weight: 47g
8 x M2x10mm Socket head screws
4 x M2x12mm Socket head screws
2 x M2x6mm Socket head screws
24 x M2x10mm Socket screws
1 x 1.5mm Carbon Fiber Top Plate
1 x 1.5mm Carbon Fiber Bottom Plate
2 x 5mm Carbon Fiber Arms
Black Nylon 3D printed canopy
The part recommendations are put together by our engineers and pilots. We strive for reliability and high quality in all of our selections, which may cost a bit extra but it allows you to enjoy the frame much more!
AIO: TBS Podracer AIO F4 FC + 30A ESC
Motors: 1507 - 3100kv or 1806 2900kv or 2004
Camera: RunCam Racer Nano 2
VTx: TBS Unify Pro32 Nano or TBS Unify Pro Nano
Antenna: TBS Triumph Pro (U.FL) *Strongly recommended, the pod is designed for this antenna.
Props: 5" (according to motor choice)
Battery: 650 - 850mAh, 3-6S
- Additional Information
Material Carbon fiber Size 200 mm Item weight (g) 47