Specifications

• Optical Flow: PMW3901
• Lidar: VL53L0X
• Interface UART
• Protocol: INAV MSP
• Working Range: 8cm~200cm
• Field of view: 42 degree(PMW3901), 27 degree(VL53L0X)
• Minimum Illumination >60Lux
• Input voltage: 4.5~5.5V
• Power Consumption: 40mA
• Size: 36*12mm
• Weight: 2g

Included

1x module 3901-L0X

Setup

This module works with INAV firmware only (2.2.x or latest)
Setting up Optic Flow in INAV - PDF manual by digitalentity

• Make sure Optical Flow lens to ground >2cm for opflow initialization while FC starting up.
• Maximum range of VL53L0X is 2m,   Altitude hold 0~2m @ throttle 0~100% if VL53L0X is enabled.
• Any unused UART of FC supports it
• Sonar connection (Trig & Echo) has not been implemented
• If your flight controller doesn’t have a barometer detected, you won’t be able to select “NAV ALTHOLD” in modes tab