Welcome

Matek F722 SE AIO flight controller

Matek F722 SE AIO flight controller
€49.00

Availability: In stock

STM32F722, MPU6000 & ICM20602, BMP280, OSD, SD Card Slot, 5x UARTs, 8x DShot, PDB, Current Sensor, BEC 5V, VTX power switcher, Dual Camera image switcher.
Description

Details

FC Specifications

  • MCU: 216MHz STM32F722RET6
  • IMU: MPU6000 & ICM20602, Dual Gyros built-in (SPI)
  • Baro: BMP280 (I2C)
  • OSD: AT7456E (SPI)
  • Blackbox: MicroSD card slot (SPI)
  • 5x Uarts (1,2,3,4,6) with built-in inversion
  • 1x Softserial supported
  • 8x Dshot/Proshot/oneshot outputs
  • 1x I2C
  • 4x RX6 pad(one per cornet) for BLheli32 ESC telemetry
  • 4x individual ESC power/signal pads
  • 1x Group of  G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
  • 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
  • Vbat filtered output power for VTX,  Switchable via AUX (modes tab-user1)
  • Dual Camera image switchable via AUX (modes tab-user2)
  • Camera control: Yes
  • Smartaudio & Tramp VTX protocol: Yes
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: Yes
  • Additional ADC for INAV analog airspeed

PDB Specifications

  • Input: 6~36V (3~8S LiPo) w/TVS protection
  • PDB: 4x35A (Max.4x46A)
  • BEC: 5V 2A cont. (Max.3A)
  • LDO 3.3V: Max.200mA
  • Current Sensor 184A (Scale 179)
  • Battery Voltage Sensor: 1:10 (Scale 110)

Physical

  • Mounting: 30.5 x 30.5mm, Φ4mm with grommets Φ3mm
  • Dimensions:  36 x 46 mm
  • Weight: 10g

Firmware support

BetaFlight / INAV
Target: MATEKF722SE

Included

1x FC F722-SE
6x silicon grommets M4 to M3
1x FR4 PCB Plate 36*36*1mm
1x Rubycon ZLH 35V/470uF (Low ESR)

Installation guides & downloads

Matek F722-SE firmwares

Matek product page & specs

Additional Information

Additional Information

Features PDB, OSD, BEC, Baro, SDCard, Current Sensor, Voltage Sensor
Gyro ICM20602, MPU6000
Mount holes 30x30mm
Item weight (g) 10

You may also be interested in the following product(s)