Matek F722 Mini flight controller

Matek F722 Mini flight controller

Availability: Out of stock

STM32F722, Dual Gyros, OSD, 32M Flash, 5x UARTs, 8x DShot, 2~8S, BEC 5V2A, VTX power switcher, Dual Camera image switcher. convertible 20mm to 30.5mm mounting.


FC Specifications

  • MCU: 216MHz STM32F722RET6
  • IMU: MPU6000 & ICM20602, Dual Gyros built-in (SPI)
  • OSD: AT7456E (SPI)
  • Blackbox: 32M-byte Flash memory (SPI)
  • Baro: No barometer built-in.  support external barometer module (I2C)
  • 5x Uarts (1,2,3,4,6) with build-in inversion
  • 1x Softserial supported
  • 8x Dshot/Proshot/oneshot outputs
  • 1x I2C
  • 1x SH1.0_8pin connector (Vbat/G/Curr/R6/S1/S2/S3/S4)
  • 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
  • Vbat filtered output power for VTX switchable via AUX
  • Dual Camera image switchable via AUX
  • Convertible 20mm to 30.5mm mounting
  • Camera control: Yes
  • Smartaudio & Tramp VTX protocol: Yes
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: Yes
  • Additional ADC for INAV analog airspeed

PDB Specifications

  • Input: 6~36V (2~8S LiPo)
  • BEC: 5V 2A cont. (Max.3A)
  • LDO 3.3V: Max.200mA
  • Battery Voltage Sensor: 1:10 (Scale 110)
  • No Current Sensor built-in, supports external current sensor of PDB/4in1


  • Mounting
    20 x 20mm M3 with Silicon Grommets
    20 x 20mm M2 with Silicon & Brass Grommets
    30.5 x 30.5mm M3 with Conversion Plate and Silicon Grommets
  • Dimensions:  28 x 28mm
  • Weight: 5g

Firmware support

BetaFlight / INAV
Target: MATEKF722SE


1x FC F722-mini
1x 20mm to 30.5mm conversion plate
6x Silicon grommets M4 to M3
6x Brass grommets M3 to M2
1x SH1.0_8pin cable 5cm
2x SH1.0_8pin connectors

Installation guides & downloads

Matek F722 firmwares

Matek product page & specs

Additional Information

Additional Information

Features PDB, OSD, BEC, Baro, SDCard, Current Sensor, Voltage Sensor
Gyro ICM20602, MPU6000
Mount holes 20x20mm
Item weight (g) 10

You may also be interested in the following product(s)