Welcome

Matek F405 STD flight controller

More Views

Matek F405 STD flight controller
€29.90

Availability: In stock

STM32F405, ICM20602, BMP280, BFOSD, SD Card Slot, VCP+5x UARTs, 6x PWM / DShot outputs.
Description

Details

FC Specifications

  • MCU: 168MHz STM32F405RGT6
  • IMU: 32K ICM20602 gyro/accelerometer (SPI)
  • Baro: BMP280 (I2C)
  • OSD: BetaFlight OSD w/ AT7456E chip
  • Blackbox: MicroSD card slot (SD/SDHC)
  • VCP, UART1, UART2, UART3, UART4, UART5
  • Built in inverter for SBUS input (UART2-RX)
  • PPM/UART Shared: UART2-RX
  • SoftSerial on TX2, S5 or S6 optional
  • Camera control on S6 or DAC optional
  • Smartaudio & Tramp VTX protocol supported
  • Battery Voltage Sensor: 1:10
  • Current Sensor: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
  • BEC 5V: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
  • LDO 3.3V: Max.300mA
  • I2C1 SDA & SCL: Yes
  • WS2812 Led Strip: Yes
  • Beeper: Yes
  • RSSI: Yes
  • Dimensions: 36x36mm PCB with 30.5mm M3 mounting holes
  • Weight: 7g

Connections

  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • 6x PWM / DShot outputs without conflict
  • 2x 2812LED outputs option
  • 5x UARTs
  • 1x Group of 5V/G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
  • 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
  • 1x pair I2C1 pads
  • 1x Side-press button for BOOT(DFU) mode
  • 1x 16pin bottom mounted FFC Slot for FCHUB-6S, FCHUB-VTX or FCHUB-W connection

Included

2x 0.5mm*16Pin 5cm Flexible Flat Cable
4x M3 Anti-vibration Standoffs

Installation guides & downloads

Matek F405 firmwares

Additional Information

Additional Information

Features PDB, OSD, BEC, Baro, SDCard, Current Sensor, Voltage Sensor
Gyro ICM20602
Mount holes 30x30mm
Item weight (g) 7

You may also be interested in the following product(s)