DYS F4 Mini FC & 18A ESC combo 20x20 4S

More Views

DYS F4 Mini FC & 18A ESC combo 20x20 4S

Availability: Out of stock

Flight stack with 20x20mm mount holes includes F4 FC + OSD + 18A 4-in-1 ESC.


FC and ESC combo comes with full cable set pre-connected, power wire and plug soldered and full nylon standoff kit to get stack mounted on the frame.


  • Betaflight firmware - "DYS F4 PRO" build can be used
  • Six-layer PCB board and 3OZ copper to enhance the over-current and heat dissipation
  • OSD chip through SPI bus DMS mode, configuration through Betaflight
  • 5V BEC onboard max 2A
  • 3 UART ports
  • SMART AUDIO, IRC TRAMP support to adjust VTX power / channel via RX or OSD
  • Vibration damping balls included
  • 2-4s direct lipo input support
  • LED driver for WS2812b programmable LED's
  • Integrated buzzer driver
  • Built-in driver inverter for FrSky S-bus / S.port capability

Specifications (Mini F4 FC)

  • Size: 33x27mm, mounting hole 20x20mm
  • Mounting: M2 with dampers, M3 without dampers
  • Weight: 6g
  • Voltage Input: 2S 7.4V - 6S 22.2V LiPo power
  • Processor: F4 (STM32F405)
  • Sensor: MPU6000
  • BEC: 5V 2A

Specifications (Mini 4-in-1 18A ESC)

  • Continous Current: 18A
  • Burst Current: 22A up to 10S
  • Input Voltage: 2-4S Lipo
  • BEC Output: 5V/ 2A
  • Size: 33 x 30 x 7.5mm
  • Weight: 6g (exclude cable and connector)
  • Firmware: BLHeli_S
  • Mounting: 20x20mm M2
  • Signal: Dshot 150/300/600, Oneshot 125/42, Multishot, PWM


1x F4 flight controller
1x 18A 4-in-1 ESC
1x buzzer with wires
2x ESC signal cable
1x power wire with XT30 soldered to ESC
8x M2 nylon standoff
4x M2 nylon screw
4x M2 nylon nut
4x vibration dampening balls

Additional Information

Additional Information

Features PDB, OSD, BEC, Voltage Sensor
Gyro MPU6000
Mount holes 20x20mm
Item weight (g) 12