SkyRC Q200 4-channel Balance Charger

SkyRC Q200 4-channel Balance Charger

Availability: Out of stock

Quad-channel charger with integrated power supply. 4 independent circuits charge four different kinds of batteries simultaneously.



Lithium battery balancer

SkyRC Q200 employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.

Maximum safety

  • Automatic Charging Current Limit
  • Capacity Limit
  • Temperature Threshold
  • Processing Time Limit

Program presets

The charger can store up to 10 different charge/discharge profiles in each channel, few clicks can activate them, which saves you repeating the dull settings.

Internal resistance measurement

The charger can test individual cell's internal resistance and the total internal resistance of the battery pack.

LiHV mode

Q200 is capable of charging / discharging the new generation of Lithium battery whose maximum voltage is 4.35V.

Power distribution

Q200 supports power distribution in AC mode. For example, Channel B is 79W, then Channel D will be 21W, but total power will remain 100W. Channel A and C works the same way.

Voltage calibration

During the manufacturing process every Q200 production unit gets tested and calibrated after highest factory standards. Ambitious users who trust their own expensive equipment more or who prefer their personal fluke to serve as reference have the possibility to adjust the Q200 factory calibration by a few counts.

PC control

The PC software enriches operating experience, like viewing realtime graphs of voltage, amperage, capacity and temperature.

Bluetooth connectivity

The Bluetooth 4.0 connectivity allows the user to remote control and monitor the Q200 comfortably through an app on a portable device such as smartphone, iPad, or iPhone. The iOS app can be downloaded from iTunes Store, the Android app from Google Play Store. Operation of the app is self-explanatory and the same on iOS and on Android. Explicit pairing is not required; after download and installation just activate Bluetooth on your mobile device and launch the app. Q200 and your device will establish Bluetooth connection automatically.

Scan To Go

A very unique feature of Q200 is SCAN TO GO (automatically charging system). As the range of battery types and capacity becomes more and more, each battery requires its own dedicated charging process. It is easy to set up the charger incorrectly for a specific type of battery, resulting damage the battery or even cause accident.

The revolutionary SCAN TO GO provides a solution to this problem by allowing the user to assign a QR Code which contains all the relevant data for the battery for charging or discharging. The user can create a unique QR Code by using “SkyCharger” apps. Print it and paste it on the battery.

Using your smart phone and launch “SkyCharger” app. Since all the essential information is stored in the QR Code. All you need to do is press the Scan button, and the charge or discharge process will start automatically.


  • Dimensions: 71x197x182mm
  • Net Weight: 1335g
  • Input Voltage: AC 100-240V / DC 11-18V
  • Charge Circuit Power Range:
  • DC Input: A/B: 100W + C/D: 50W
  • AC Input: A+C=100W + B+D=100W; A/B: 50-100W C/D: 0-50W
  • Discharge Circuit Power: 4 x 10W
  • Charger Current Range: CH A/B 0.1-10A + CH C/D 0.1-5A
  • Discharge Current Range: 0.1-2A x 4
  • Current Drain for Balancing Port: Max 200mA/cell
  • Trickle Charging Current: 50mA-300mA & OFF
  • LiPo/LiFe/Lilon/LiHV Battery Cell Count: 1-6S
  • NiMH/NiCd Battery Cell Count: 1-15S
  • Pb Battery Voltage: 2-20V


1x SKYRC Q200 Charger
4x XH Adaptor
2x Charging Cable
4x Banana Connectors with XT60 Connector Charging Cable
1x AC Power Cord


Q200 Instruction Manual V1.50
Charger Master V1.08

You may also be interested in the following product(s)